SuperSquare-Laser 4

90° line laser - ideal for laying wall and floor tiles

This 90° line laser projects four highly visible lines and is ideal for laying wall and floor tiles. The attached lay edges and contact surface make it easy to position floor tiles. The special pins allow the device to be securely positioned without damaging surfaces such as finishing coats, carpets, wood and veneers. Integral vials allow the device to be adjusted – these can also be used a spirit level.

• Angle accuracy 0.5 mm/m
• The 4 clearly visible laser lines are ideally suited for aligning tiles
• Vertical and horizontal levelling on walls
• The applied lay edges and contact surface make it easy to position floor tiles
• Clean application on all surfaces - also when using pins 
• Bubble levels to adjust the device
• Can be used as a laser spirit level

Specifications:

• Horizontal and vertical levelling
• Manual slope function
• Battery operation
• Levelling: manual
• Vial accuracy: ± 0.5 mm / m
• Angle accuracy: 0.5 mm / m
• Laser: line laser
• Laser wavelength: 635nm
• Laser class: 2 / < 1 mW (EN 60825-1:2014/AC:2017)
• Power source: 2 x 1.5V LR6 (AA)
• Operating time: approx. 15 hours
• Temperature (working conditions): 0°C - 50°C

Inclusive:

• SuperSuare-Laser 4
• Pins
• Batteries