Product Description
Electronic locating device for metal objects, live wiring, wall beams and joists – includes depth display in metal mode and centre/edge display when locating beams.
This electronic locating device provides targeted location of metal, location of live and non-live wiring, and identification of wall beams and joists. The device is suitable for use on all non-metallic drywall structures It identifies hidden, non-magnetic metals under stone, concrete, screed, wood, ceramic and mineral building materials to a depth of up to 10 centimetres and magnetic metals to a depth of up to 12 centimetres. The device displays the depth in metal mode and indicates whether the metal is magnetic or non-magnetic. Live wiring can be located up to a depth of 2 centimetres, such as under plaster or wooden panelling. Wall beams and joists made from wood or metal can be identified in drywall structures, for example, under gypsum fibreboards. Beam centre and edges are both shown on the display. Visual and acoustic signals and an LCD bar display clearly show items have been located. Automatic and manual calibration functions ensure optimum isolation of measured objects and adjustment to different surfaces. The permanent voltage warning ensure high levels of safety. The device automatically switches itself off after a short period of inactivity to save energy.
- Targeted location of hidden, magnetic or non-magnetic metals under stone, concrete, screed, wood, ceramic and mineral building materials
- Device provides information on whether magnetic or non-magnetic metal has been detected
- Precise depth display in metal mode to check drilling depths
- Precise location of live and non-live wiring, such as under plaster or wooden panelling
- Precise location of wall beams and joists in drywall structures, including centre/edge display
- Automatic and manual calibration functions for optimum adjustment to the surface and isolation of measured objects
- Suitable for all non-metallic structures
- Simple and reliable application thanks to user guide on LC display
- Sturdy, ergonomically designed housing
- High level of safety through permanent voltage warning
- Energy-saving Auto Off function when not in use
Specifications:
- Autocalibration
- Metal detection
- Specific metal detection (iron/copper)
- Identification of supporting structures (metal/wood)
- Depth display in metal mode
- Live wires detection
- Warning for 230 V wires
- Ports: USB type C
- Detection range: 5 cm depth
- Measuring range:
- Targeted metal location: Ferro-Scan / Non-Ferro-Scan (METAL-SCAN): up to 12 cm / up to 10 cm depth
- Targeted location of live supply lines (AC-SCAN): up to 4 cm depth
- Location of dead supply lines: up to 4 cm depth
- Wood / metal beam location (STUD-SCAN): up to 2 cm depth
- Accuracy: typically 3% of measured depth
- Power source: Li-ion battery pack 3.7V / 0.3Ah
- Operating time: approx. 3 hours
- Charging time: approx. 1 hour
- Temperature (working conditions): -10°C - 50°C
Included:
- MultiScanner Plus
- Li-ion battery pack
- USB-C-cable
- carrying case
